[1fstbrd]

I don't have any good pics of my dash, but this is the same one.

http://www.pontiacserver.com/transam78/dash.jpg

I've never replaced gauges before, and really the only ones that I want to replace are the 4 smaller ones on the right side.
I'd like to replace the 3 in front of the steering wheel to make everything match, but those are original and I'd kind of like to keep them.
I would still like to know what size I would need to get in order for them to fit correctly.
It looks like those 2 1/8" seems to fit pretty well. I measured mine and they are about 2 3/4". Maybe that's why they don't look right?

Thanks again.

 

[1fstbrd]

I love these ones, but I'm afraid 2 1/16" and 3 3/8" are just too small.

http://www.autometer.com/cat_gaugedetail.aspx?gid=3906&sid=74

 

[1fstbrd]

The 2 1/16" are just the gauge body. With the bezels, they should be about 2 1/8" which will probably be just fine. Be careful when you order your gauges though, the one's you linked are Electric, not mechanical. Could present a major wiring headache.

Also, the 2 right most spots on the dash are for a/c and will be ducted behind the dash making it pretty difficult for a gauge installation.

I'd recommend staying with the factory tach and speedo and replacing your oil/water/volt with something close to your factory face.

Yeah, I'm definitely going mechanical... the last thing I want to do with that car is deal with more wiring issues. Actually, on my dash there are already gauges in those 2 spots on the far right, and I know they're easy to get at, so that won't be a problem.
Thanks for the help!