I've got a 1993 formula, bought with blown head gaskets. Replaced water pumped, thermostat, coolant temp sensor. After i got it back, the air pump fuse blew. Then the fan motors stopped working. I don't want to put a switch in, i would like the car to run how it was designed to run. If anyone got any ideas..
fan motors stopped?
lt1bug
1 - 1 of 6 Posts
Joined
·
195 Posts
On your radiator there is a thermal switch with two wires going to it.Pull the connectors off (remembering where they were would help) and put a jumper between the two or join them.Now switch the ignition on and the fan should run.If not you either have no power to the switch or the thermal switch is faulty.Put a test light on each wire one at a time and see if there is power.Only one should have power.If the fan doesn't run with these two wires joined then your fan is more than likely faulty.
Rob
Rob
1 - 1 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
