Firebird Nation Classifieds Feeds

Firebird Nation Classifieds Feeds Classifieds for sale, wanted, etc http://www.firebirdnation.com/forums/index.php Fri, 20 Nov 2009 04:40:10 +0000 30 FS:1995 Formula LT1 Black http://www.firebirdnation.com/forums/index.php?showtopic=150992
Has 6spd transmission. K&N cold air intake, removed rear muffler, ported TB, port matched heads, tubular rear control arms and panhard bar.

Just replaced drivers side window motor a month ago, passenger works great. Has aftermarket pioneer cd player.

Chassis has 52k miles, no rust, garage kept.

Motor runs very strong, very fast car, and quite a handfull to drive.

I picked the car up with the current wheels on it. They are older corvette 17"ers that i painted black in the center. Have some less expensive all-seasons on it right now with about 6-?32nds left. Car also comes with 2 spare stock 16" 5spoke wheels and a set of 14" S-10 wheels that i would also just like to get rid of.

-Few minuses to the car,

Small 1-2" crack in the drivers door just under the mirror, the drivers side headlight gear is going(makes the dreaded buzz after going down), the lower radiator support is bent a bit.

CEL is on due to removed AIRinjection during the rebuild

AirBag light is on, never looked into it though.

I've had the car for about a year now, and put around 6k on the rebuild. Car runs perfect, and makes no ablormal noises. Oil changed end of october for the 3rd time(since the initial break-in)

Just cant afford to keep it right now due to financial reasons and really need it gone as soon as possible.

Looking to get 4200$ OBO. or, am willing to trade for a BMW 3series 5speed, but looking to just get some cash.

Located in Stevens Point/Plover, Wisconsin - but i am willing to drive a little ways but only for SERIOUS buyers.

contact me at 715-570-4532 ask for mike, or PM or

E-mail me @ lanting90@gmail.com

http://img.photobucket.com/albums/v736/lanting90/FormulaEngine.jpg

http://img.photobucket.com/albums/v736/lanting90/FormulaRear.jpg

http://img.photobucket.com/albums/v736/lanting90/Formulaside.jpg

http://img.photobucket.com/albums/v736/lanting90/MAH000381_1__0001.jpg

]]> Fri, 20 Nov 2009 04:40:10 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=150992 <![CDATA[WTB: '68 Front Cocktail Shakers]]> http://www.firebirdnation.com/forums/index.php?showtopic=150845 Thu, 19 Nov 2009 21:47:40 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=150845 wonder bar http://www.firebirdnation.com/forums/index.php?showtopic=150545

]]> Wed, 18 Nov 2009 23:46:06 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=150545 Bunch of Parts for Sale http://www.firebirdnation.com/forums/index.php?showtopic=149911

Also have a nose from a 79 formula grills included $75+ shipping

Front clip from a 82 $45 per fender $50 on the hood and $50 on the nose (no grills) need the whole thing just shoot me a price

i also have the carpets, door panels steering wheel it got dark and pics are dark i will post them tomorrow]]> Mon, 16 Nov 2009 23:21:10 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=149911 SLP Loudmouth http://www.firebirdnation.com/forums/index.php?showtopic=149643 Link to SLP muffler, it sells for $250 new.
Resonator - 3" in 3" out. Muffler - 3" in dual 2.5" out.
$125 plus shipping.

]]> Mon, 16 Nov 2009 02:07:00 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=149643 89 trans am headlight assembly http://www.firebirdnation.com/forums/index.php?showtopic=149572 I have a left headlight assembly for 85-90 firebird or trans am that has 2 wire motor for sale..... 50.00 plus shipping...... also a headlight and bucket for the right side h/l assy.... make offer

]]> Sun, 15 Nov 2009 22:15:37 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=149572 WTB: LT1 Headers, Des Moines, IA http://www.firebirdnation.com/forums/index.php?showtopic=149067 I am looking to buy some lt1 headers for my 93 trans am. If you have some please contact me at 5157078869 or gcar1992@yahoo.com. Fri, 13 Nov 2009 23:43:40 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=149067 1974 Firebird Rolling Chassis http://www.firebirdnation.com/forums/index.php?showtopic=147676
$350
http://reno.craigsli...1449420531.html]]> Mon, 09 Nov 2009 17:19:11 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=147676 98-02 Front end http://www.firebirdnation.com/forums/index.php?showtopic=147488 I need to the following to do my front end conversion..... 98+ Fenders, Bumper, Headlights, Bumper bar, Lights wire harness, and hood. Mon, 09 Nov 2009 01:35:27 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=147488 Front door speaker - 4th gen http://www.firebirdnation.com/forums/index.php?showtopic=146717
Thanks]]> Fri, 06 Nov 2009 17:17:20 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=146717 Misc. parts http://www.firebirdnation.com/forums/index.php?showtopic=145769 http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0590.jpg
stock de-screened MAF for 95-97 LT1 - $30
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0591.jpg
CC503 camshaft for 96-97-? LT1. This cam has about 8000 miles on it and is in good shape. - $100
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0595.jpg
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0597.jpg
Exhaust tips, 2 1/2" inlet, very little use - $50
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0599.jpg
Nearly new LT1 starter - $40
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0593.jpg
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0594.jpg
(2) PCMs, one stock tune, 96 LT1 A4 and one PCM4less tune, 95 LT1 A4 - $50 each
http://i47.photobucket.com/albums/f192/rusnrno/cars/parts/IMG_0534.jpg
:29rulez:

Sorry about the double post on some of these items. The other thread was dead. :14dunno:

]]> Wed, 04 Nov 2009 01:02:53 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=145769 tuning software http://www.firebirdnation.com/forums/index.php?showtopic=145645 Tue, 03 Nov 2009 13:51:01 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=145645 1970-73 firebird, formula, trans am parts. http://www.firebirdnation.com/forums/index.php?showtopic=144817
I should also note that i am willing to trade for items as well. just let me know what you have. wanting fiberglass front end parts such as fenders, nose, lower valence, hoods, after market 9inch rear end, full rear wheel tubs. but if you dont have those its ok im looking for firebird parts like front window glass. trim for the front and back windows side drip rails, lower body trim, wheel flair parts like the ones that came on Trans ams. after market wheels would work as well. but just shoot me what you got if your wanting to trade for something lol.

i can ship items and they will be actual costs from UPS or our local USP it just depends on who is cheaper to ship. although i would rather use UPS.

You can send me a PM or tag me through my personal email Pontiacbird82@yahoo.com and i can get extra photos to you

cell phone 316-990-3554 i work with pay pal only. Cash is excepted if your personally picking something up. other wise its pay pal it protects you and me.

What I have At this moment is

3 tail light bezels two lefts and one right hand. Two of them are what I would consider usable and one needs to be re chromed. The two use able ones do have bubbles forming under the chrome but not bad they also have all the mounting studs.. And the last one has LOTS of bubbles and should be re chromed missing two mounting studs.

http://i641.photobucket.com/albums/uu132/arndor/PICT9025.jpg
right hand side bezel good.

http://i641.photobucket.com/albums/uu132/arndor/PICT9028.jpg
right hand back side good.

http://i641.photobucket.com/albums/uu132/arndor/PICT9032.jpg
left hand side good

http://i641.photobucket.com/albums/uu132/arndor/PICT9034.jpg
left hand side back good.

http://i641.photobucket.com/albums/uu132/arndor/PICT9036.jpg
left hand side needs re chrome.

http://i641.photobucket.com/albums/uu132/arndor/PICT9038.jpg
left hand side back need re chrome.

For the better ones id like to get around 35 each and theworse one just make me an offer would like to get 20 for it.

On a side note I can strip them all down to clean metal if requested at no charge. you can have them re chromed or paint them to match your car. And this applies for any other small part that is metal as well. Larger parts I will charge another 10 bucks an hour to clean and strip.

i also have a drivers side and passenger side front nose grills 1972-73

At some point some one did think it was a good idea to paint them gold? Why idk, it does come off pretty easy. They are intact. The top outer bolt hole does have a crack on both grilles I assume it was because someone over tighten them. All other bolt holes are fine with no cracks at all.

The photos I have uploaded show the paint over the chrome but i have removed all the paint on one grill's chrome trim and then "PONTIAC"emblem as been stripped as well ill get the other one taken care of tomorrow.

From my understanding these are hard to come by and can not be bought new.

I am open to offers on them.

http://i641.photobucket.com/albums/uu132/arndor/PICT9040.jpg
drivers side

http://i641.photobucket.com/albums/uu132/arndor/PICT9042.jpg
drivers side
http://i641.photobucket.com/albums/uu132/arndor/PICT9044.jpg
drivers side back
http://i641.photobucket.com/albums/uu132/arndor/PICT9045.jpg
passenger side
http://i641.photobucket.com/albums/uu132/arndor/PICT9046.jpg
passenger side
http://i641.photobucket.com/albums/uu132/arndor/PICT9047.jpg
passenger side back

I would like 140 each. Or both for 220

i also have a complete left hand and right hand side headlight bucket assemblies. there is ZERO rust through on these

http://i641.photobucket.com/albums/uu132/arndor/PICT9050.jpg
passenger side
http://i641.photobucket.com/albums/uu132/arndor/PICT9051.jpg
passenger side
http://i641.photobucket.com/albums/uu132/arndor/PICT9053.jpg
passenger side back
http://i641.photobucket.com/albums/uu132/arndor/PICT9055.jpg
passenger side back
http://i641.photobucket.com/albums/uu132/arndor/PICT9056.jpg
driver side
http://i641.photobucket.com/albums/uu132/arndor/PICT9064.jpg
driver side
http://i641.photobucket.com/albums/uu132/arndor/PICT9059.jpg
driver side back
http://i641.photobucket.com/albums/uu132/arndor/PICT9061.jpg
driver side back

from what i understand you can not buy these new from anywhere that I know of. The part numbers on these are PMD-22 with SAE H 70 stamped in it.

open to offers as well.
I'm looking for 160 each. Or both for 260. i will be sand blasting the back plates to clean them up.

Items still to come I have 2 sets of front bumper mounting brackets the ones from the sub frame that are shaped like an L, 3 front noses two 1970-71 and one 1972-73, complete nose bracket assembly for a 72-73 nose,several rear interior panels. A very nice back seat, black leather back pad and lower buckets. I have two front seats 1970-71 white needs to be re covered still has the plastic backs on them. I also have 1 front bucket seat 1972-73 brown in color same condition as the white ones also has seat back on them still. I have two sets of front fenders one set is 70-73 firebird or formula models need the lower section in the back repaired. The other set is 1977,78 I believe black trans am fenders needs the same section repaired. They do have the grills in the side of them still,

I also have a 1970-71 set but they are kind of dented up. I will be working on removing the front brackets from them so they can be used to convert the later year fenders to the1970-73 style. I have one rear spoiler set for the 1970-78 style back end with the outers that come to a point on the bottom edge. The center section has a crack internally on the right side. The right outer has been broken but may be fixable. The passenger side is in perfect condition. I also have a rear decklid from a 71 firebird good condition no rust holes in it. I have upper head liner brackets the thin metal ones that line the roof. Several dash panels one is scalloped and is silver. It has the RTS emblem in the center so I do believe it is for after 1974 but can be used for any year. The others are the wood grain with the firebird emblems a couple gauges a 100mph speedo with the seat belt and brake lamp slots, a 160mph speedo with the break light slot only, a unleaded fuel and volts cluster 1970-73 style, one dummy light pod with amps oil and water lights, firebird emblem in the center,one 6k tack and clock, one center unleaded fuel guage that fits in the center of the gauge cluster, one water and oil gauge that fits in the center of a gauge cluster. Two gauge cluster boxes one is for a dummy light and speedo withone opening in the bottom and unleaded fuel gauge in the center. the other is the type with the tack and speedo with the duel function gauge in the center. Both boxes have lenses and black bezels. i also have three sets of hood lift assemblies, Um extra glove boxes and some dash parts. have two extra sets of doors as well as a 1978-81 turbo hood.

I do not have any center consoles sorry.

If your needing something just pop me a PM I might have it and I might not.

]]> Sun, 01 Nov 2009 06:30:43 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=144817 98-02 rocker trim...sideskirts http://www.firebirdnation.com/forums/index.php?showtopic=144807 I have a 99 firebird but i want it to look like a T/A anyone got what I need? Sun, 01 Nov 2009 04:19:38 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=144807 403 shaker http://www.firebirdnation.com/forums/index.php?showtopic=144745
so looking for someone that has a cut on that wants to trade for a uncut one,in similer condition.
i am in north Iowa.

]]> Sat, 31 Oct 2009 23:44:34 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=144745 301 Shaker Air Cleaner Base - Ft. Worth TX http://www.firebirdnation.com/forums/index.php?showtopic=144739 Hey all! I need to buy a Shaker air cleaner base(and lid) for my 301 trans am. I have the shaker itself already. If anyone has one they want to sell, LMK. Thanks! Sat, 31 Oct 2009 22:08:41 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=144739 Parts wanted http://www.firebirdnation.com/forums/index.php?showtopic=144418 I am looking for 91-2 headlight assemblies right and left in good working order.... complete with motors.. anyone having such things ...please pm me]]> Fri, 30 Oct 2009 19:46:32 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=144418 engine needed http://www.firebirdnation.com/forums/index.php?showtopic=142857 Sun, 25 Oct 2009 22:05:31 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=142857 Flowmaster Cat-back exhaust http://www.firebirdnation.com/forums/index.php?showtopic=142574 $150 with tips or $100 without

Tips alone - $50
Near new stock replacement starter for LT1 F-body - $50

Two PCMs
First one was tuned by Pcm4less. It's a 95 LT1 A4, tuned for CC305 cam and headers - $60
Second is from a stock 96 LT1 A4 - $40

]]> Sat, 24 Oct 2009 22:21:32 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=142574 1982 Trans Am with 23,889 original miles NJ http://www.firebirdnation.com/forums/index.php?showtopic=142234 1982 Trans Am WS7 with 23,889 ORIGINAL MILES.
Asking $8500 or best offer!!Car is located in central/north NJ.
Black over Goldwing Metallic with light camel cloth interior (sorry not PMD). Original paint shines up really nice.
-4 Speed manual
-T-tops
-WS7 handling package
-Original Build Sheet
-power windows and rear hatch release.
-Everything works as it should except for a/c (windows, rear hatch release; rear defrost, etc).
-Nice pliable weather seals, no leaks.
-Nice comfortable ride (actually rides better than my 2001 WS6).

The car has been garage kept since new. It was stored from 1993 until May of this year when I bought it from the original owner. It was his wife's daily driver from 1982-1993 when she blew the a/c compressor. Rather than fixing the a/c and driving it they parked it and bought a new car.It had a 1993 inspection sticker in the window when I bought it!

Since I bought the car I have done the following:
-Changed oil and primed the motor before cranking it.
-Valve cover gaskets.
-New plugs and wires.
-New front brake calipers and pads.
-Removed the original 15" turbo cast wheels and bowling ball caps (with the original tires) and put on 16" T/A wheels from a 86 Trans Am (painted black) with 245/50-16 tires. Both set of wheels come with the car.
-Optima Yellow Top battery.
-New hood struts.
-Nice heavy coat of wax!! ; )

The car does need a few things to be perfect.
-The a/c is still inop and will require at least a compressor and new lines
-The previous owner scraped the front bumper cover and put a small dent in the right fender when he backed out of the garage a couple years ago.
-There is a small section of the Goldwing Metallic paint along the bottom of the passenger side that needs touchup due to sitting in the same garage bay for 16 years. While the rest of the car was protected this part was in direct sunlight every day for 16 years.
-There are 3 or 4 small dings around the car which could be removed using a paintless dent removal company.
-There is a wear mark on the driver side carpeting where someone's shoe wore through the carpet. They opted not to buy floor mats for the car when they bought it…
-There is some discoloration of the interior plastic in the rear cargo area due again to sitting in the same spot for 16 years.

See link below for more, higher quality pictures. Also, I know my thread count here is a little low. I'd be happy to supply references from other boards (Turbo Buick boards) or Ebay(username/RamAir5.7.

Thanks for looking!!
1982 Trans Am PICS]]> Fri, 23 Oct 2009 14:03:08 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=142234 98-02 firebird rear bumper http://www.firebirdnation.com/forums/index.php?showtopic=141224
50 + shipping OBO. looking to get rid of this asap. Located in MA

Also have some stock firebird low beam headlight housings. Free, just pay for shipping LOL was gonna use them to house some projectors, but passed on that idea.]]> Tue, 20 Oct 2009 14:11:38 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=141224 1994 T/a 383 lt1 http://www.firebirdnation.com/forums/index.php?showtopic=140225
Motor
383 stroker
heads have stage 2 porting with 250cfm intake and 165 exhaust
2.00"x1.55" valves
LT4 hotcam kit
air gap intake manifold
ceramic elbow
granatelli maf
lingenfelter CAI
NEW OPTI STILL under warrenty
MSD 8.5 mm wire
acdelco plugs
granatelli 255 lph fuel pump
all new sensores and emmsions from napa exp. map, o2, knock, egr, air, air fittings to headers.
the only thing reused on this motor was the vavle covers, fuel rail, injector, and oil pan
injector do have to be swapped for bigger ones

Exhaust
Edelbrock shorty ceramic coated
high flow cat
maganflow cat back

transmision is freshly rebuilt with about 15000 miles on it.

stock rearend and gears

stock suspension

I am looking for 8000 or a trade for a ls1 bird

]]> Fri, 16 Oct 2009 22:08:04 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=140225 Looking for 69 Automatic Shift Knob http://www.firebirdnation.com/forums/index.php?showtopic=139689 labovebl@gmail.com]]> Thu, 15 Oct 2009 01:10:24 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=139689 WTB: Project 1969 Firebird - father/son resto http://www.firebirdnation.com/forums/index.php?showtopic=139183
As rust free as possible, local CA car preferred. If I can drive the car home with some care, I'm willing to go any western state within say 1,000 miles.

Numbers matching, any V8/4-Spd manual combo
Factory AC, PS, & PB

No convertibles.

Hopefully these still exist lol.

If it atleast has the options I listed above, I will still go for it not running and will simply trailer it. I'm flexable on the PS/PB but it MUST have AC.

Thanks!

Alex

alexclaytor@gmail.com]]> Tue, 13 Oct 2009 15:11:59 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=139183 wanted SLP Y-pipe used and or catback for LS1 F-body http://www.firebirdnation.com/forums/index.php?showtopic=138194 Sat, 10 Oct 2009 07:05:18 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=138194 looking for trim ring 1996 firebird pbuttenger side http://www.firebirdnation.com/forums/index.php?showtopic=137341 need a trim ring for pbuttenger side headlight. msg me if u know of one. Wed, 07 Oct 2009 20:49:54 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=137341 In need of SBC http://www.firebirdnation.com/forums/index.php?showtopic=136214
Thanks,

Will

~~CLEVELAND, OHIO~]]> Mon, 05 Oct 2009 00:51:17 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=136214 98 Trans AM http://www.firebirdnation.com/forums/index.php?showtopic=136104 Interior is in very good condition. Body and paint are fair with a small scrape on the right rear 1/4 panel. The power steering pump and clutch cylinder needs to be replaced. And it sounds like a rear axle bearing is going out.
Price is $4000 firm.
This car is in Reno, NV.
http://i47.photobucket.com/albums/f192/rusnrno/cars/IMG_0400.jpg
http://i47.photobucket.com/albums/f192/rusnrno/cars/IMG_0398.jpg
http://i47.photobucket.com/albums/f192/rusnrno/cars/IMG_0397.jpg
http://i47.photobucket.com/albums/f192/rusnrno/cars/IMG_0396.jpg]]> Sun, 04 Oct 2009 16:06:20 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=136104 1978 Pontiac Firebird Trans Am Drag Car http://www.firebirdnation.com/forums/index.php?showtopic=136018

CONDITION
Very Good, 24,000 miles

DESCRIPTION

The best description can be found on my web site. Here is the link http://www.leverfamilysite.com/1978_Pontiac_FireBird.htm or on this forum at
http://www.firebirdnation.com/forums/index.php?showtopic=72656
http://www.leverfami....c_FireBird.htm

Please review this build closely as there are too many good parts in this car to list here.

For this e-bay action, my intention is to remove the current transmission and engine. The price for this set up will be 7,500 until the e-bay action starts, and then it will be the latest bid on e-bay.

The car can be purchased in its current form with the stroked Ram Air III engine with Kauffman racing heads and EP-57 cam as depicted on my web site. In that configuration, it currently consistently runs 10.72 in the ¼ mile. See this U-Tube video http://www.youtube.c....layer_embedded

This package (current form) would also include the 350 Reverse valve transmission with transmission brake.

As the car is, in this form, the car can be yours once full payment is made. The only thing I will remove at this price will be the data recorder. The price for that is $15,000

I have another Pontiac 400 sitting at the engine shop.

It will be loaded up with the goodies from my past builds.

Forged pistons

Forged rods

Performer intake

Holley 750 double pumper

Engle solid lifter cam (EP-25)

Roller rockers with a ratio of 1.6

Headers

Pontiac Head number 48: these heads are 1969, 400, 366HP, valves 2.11/1.77, MT Ram Air III

Machine work will be

Bored .35 over and honed

Balanced

Line honed

You will have a choice of either a turbo 350 or 400 transmission

The engine shop is Pro-Formance Specialties http://www.pro-forma...pecialties.com/

The engine will be run on a test stand before being installed in the car

This car will then be in its last configuration before the current build.

It ran the ¼ mile in 11.78 in that set up. See this U-Tube video http://www.youtube.c...h?v=v78ZlRYD34A

Car

Fuel Cell

Electric fuel pump

Electric water pump

Electric fan

Rear mounted battery

New Yellow top battery

Rear shut off

Mallory fuel pump with external regulator

32 spine rear axles

"C" clip eliminators

Eaton Posit action

12 bolt rear end

Latter bars

Axle sliders

Rear end brace

U-Joint girdle

Drive shaft hoop

Roll cage

Custom dash with vintage Sun gauges, dash was built to be removable

Racing seat

Five point harness

New two inch front lowering springs

Lockwood 90/10 shocks

Electric fan

New Polyurethane front bushings

The rear slicks are brand new (28 by 10.5) with just 5 runs on them.

NOTES

The car is for sale locally, I reserve the right to end it early.

As this car is not in its sale form, delivery will have to be scheduled.

A non-refundable $500.00 deposit will be taken, and final payment will not be taken until the car is ready to be delivered.

As the engine is to be built, this provides you with the option of supplying different parts to be installed for free (you supply the parts).

The car can be purchased in its current form with the stroked Ram Air III engine with Kauffman racing heads and EP-57 cam as depicted on my web site. In that configuration, it currently consistently runs 10.72 in the ¼ mile. See this U-Tube video http://www.youtube.c....layer_embedded

This package (current form) would also include the 350 Reverse valve transmission with transmission brake.

As the car is, in this form, the car can be yours once full payment is made. The only thing I will remove at this price will be the data recorder. The price for that is $15,000

If you are interested in this car, and because there are so many variables involved, it would be best to call me (585) 342-3261 or send me your phone number so that all the variables are understood before the end of the auction

Special Note
This is not a street legal car and is meant for drag racing only. There are no warranties, this is a race car.

]]> Sun, 04 Oct 2009 05:50:16 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=136018 2003 Continental Cargo Trailer Enclosed Car Carrier 9,990 GVW http://www.firebirdnation.com/forums/index.php?showtopic=136012
Vehicle Description

2003 Continental Cargo Trailer Enclosed Car Carrier 9,990 GVW

DESCRIPTION
The trailer is a top of the line 9,990 pound GVW 2003 Continental Cargo trailer called an Auto Master. It has all the options listed below installed by the Manufacturer (features are listed in the attached pictures).

In addition I have added the following things.

New "E" load range tires (these are 10-ply when most people use "D" load range which are 8-ply tires).

5,000 pound Super Winch
Sealed Red top battery
Battery charger, all set up in a "winch center"

Four electrical circuits, all wiring is enclosed in conduit or inside the walls.
A new Carrier Transcool Air Conditioner

A side window.
Heavy duty Generator hatch. The window and door were installed by Cobra Motor homes http://www.cobramoto...ndtrailers.com/
A new very heavy duty generator slid out tray, not yet installed, comes with the trailer.

The floor is covered with the traditional checkerboard flooring, and I have enough to do the ramp. I did not install it because I was afraid it would be too slippery. That additional flooring goes to the buyer.

The trailer comes undercoated from the manufacturer, but I took it over to Zeibart and had them recoat the underside.

I am a trucker by heart; I added 16 outside marker lights which match exactly the original marker lights.

I have added wiring so that backup lights can be installed on the trailer (they would come on when the tow vehicle is put in reverse).

There are six two-tube, four-foot, moisture and dust protected florescent lights installed. These lights have the cold weather ballasts and start up even in the coldest weather.

The hubs were pulled this spring and repacked and brakes were adjusted by General Welding and Fabrication.

One spare tire and rim.

There is nothing wrong with this trailer and I hate to sell it as I know it can not be replaced for what it is selling for. (I do have the 28-foot trailer by the same manufacturer). The real reason for selling the trailer is I need the cash for a fully enclosed front body on the new dragster.

Notes
Most people think of a trailer as a tow vehicle and overlook that they make a great inexpensive winter storage garage for your car or parts.

Original Trailer manual and paper work is included.

This trailer is listed locally and I reserve the right to end the action early.

This is a no reserve auction.

Many pictures and the build projects on this trailer can be seen here. http://www.leverfamilysite.com/2003_Continental_Cargo_Trailer.htm

http://www.leverfami....go_Trailer.htm

Thanks for looking and good luck bidding. Take a look at my other auctions

This will go up on e-bay Sunday night Starting bid is $6,500 and I will sell it for that localy until e-bay starts. Once there is a bid on e-bay that will be my selling price locally.
.
.
.

]]> Sun, 04 Oct 2009 05:30:42 +0000 http://www.firebirdnation.com/forums/index.php?showtopic=136012